North Carolina winters are usually mild, and that is exactly why frozen pipes catch so many homeowners off guard. A single hard freeze across the Triangle or down toward Wilmington can turn an unprotected pipe into a burst line, and a burst pipe can release hundreds of gallons of water into walls, floors, and crawl spaces before anyone notices. With colder nights arriving, now is the time to get your home ready.
Why pipes burst in a freeze
When water freezes it expands. Ice forming inside a pipe builds pressure between the blockage and the closed faucet, and that pressure is what splits the pipe, often at a spot away from the ice itself. The pipes most at risk are the ones in unheated spaces: crawl spaces, attics, garages, exterior walls, and under sinks on outside walls. Many homes in our area are built over crawl spaces, which makes them especially vulnerable.
7 ways to protect your pipes this winter
- Insulate exposed pipes. Foam pipe sleeves from any hardware store are inexpensive and easy to install on pipes in crawl spaces, attics, and garages.
- Close crawl space vents and seal gaps. Cold drafts through vents, cracks, and openings around pipes are a leading cause of freezing.
- Disconnect garden hoses. Drain and store hoses, shut off the valves that feed outdoor spigots if you have them, and consider insulated faucet covers.
- Let faucets drip on the coldest nights. A slow drip from taps on exterior walls relieves pressure and keeps water moving.
- Open cabinet doors. Letting warm room air reach the plumbing under kitchen and bathroom sinks makes a real difference.
- Keep the heat on. Hold the thermostat at a steady temperature day and night, and if you travel, leave it at 55°F or higher.
- Know where your main water shut-off is. Find it now, make sure it turns, and show everyone in the household. In an emergency, every minute counts.
If you think a pipe is frozen
If you turn on a faucet and get only a trickle, a pipe may be frozen. Keep the faucet open and gently warm the pipe with a hair dryer, a heating pad, or warm towels, starting from the faucet end and working back. Never use an open flame, a torch, or a propane heater to thaw pipes. If you cannot locate the frozen section or cannot reach it, call a licensed plumber.
If a pipe bursts
- Shut off the main water valve immediately.
- Turn off electricity to affected areas if water is near outlets or appliances, and only if you can do so safely.
- Move furniture, rugs, and valuables out of the water’s path.
- Take photos and video of the damage for your insurance claim.
- Call a professional water damage restoration team right away.
Water spreads quickly into drywall, subfloors, and insulation, and mold can begin to grow within 24 to 48 hours. Fast extraction and professional drying are the best way to limit the damage and the cost of repairs.
Encore RRC is here 24/7
From Raleigh to Wilmington, Encore RRC responds around the clock to burst pipes and water damage. Our team extracts water, dries and monitors the structure, prevents mold, works with your insurance company, and completes the repairs, all backed by our 7-Year Workmanship Guarantee.
Dealing with a burst pipe? Call Encore RRC at (919) 301-8320, any time, day or night.